1 . Place the Dynalink Installation CD into the CD Rom drive. The installation utility will begin.
Click Next
2. The device selection dialog box will appear.
Select Modems then ADSL Broadband.
3. The ADSL Broadband modem selection dialog box will appear.
Click ADSL Router with Dual Interface (RTA230)
4. The RTA 220 specifications dialog box will appear.
Click Modem Drivers
5. The Dynalink driver Installation dialog notice box will appear.
Click Yes
6. The Installation folder will appear.
Double click Askey ADSL USB PC Driver 3.1.3-BCM.exe
7. The software Installation will begin.
Click Next
8. A dialog box will appear advising to connect your ADSL modem.
Now please connect your Dynalink RTA 230 ADSL modem to your computer using the provided USB cable.
9. To configure your RTA 230 for use with iPrimus Broadband, open Internet Explorer.
In the address field type 192.168.1.1 then press Enter
10. The RTA 230 login dialog box will appear.
In the User name field type admin followed by admin again in the Password field. Next click OK.
11. The Quick Setup dialog box will appear.
In the Broadband User Name field type your username followed by @primusdsl or @dsl2.iprimus.com.au, depending on the type of account you have (if unsure please check your Service Summary sheet), then type your password into the Password field. Next click Connect.
12. At this stage your Internet Connection is being established.
Please wait while this process takes place.
13. After a few moments time a dialog will appear showing your connection status as connected.
14. Configuration of your modem is now complete, you are now ready to start surfing the Internet.
